Markdown (.MD) is a text format that lazy people use to write HTML. Unfortunately once those same lazies are used to the format, their eyes glaze over and they start to believe .MD is the solution for all the world’s problems. They share a lot in common with githubbies who think github is the solution for book production, open source, bad democracies etc..
.MD files are common in the geek world. Programmers love them. The design of .MD is simple and efficient. If you know the syntax, you can write basic text documents with headers and bullet lists, blockquotes, bold & emphasis etc. pretty quick. That makes it a handy tool for the elite of text workers – programmers – to develop simple text documents, quickly. So it’s a popular format for writing, for example, human-readable README files that tell you a little bit about the software you are about to install. However, that is where the use case ends. .MD is not a useful format for many other cases unless you want to prove to the programmers that you too can do tricky stuff in plain text. For the rest of us, it has little value.
Markdown was originally developed by John Gruber in 2004 and you can read about some of the reasons why he developed it here. The original purpose of .MD is that it can be read without converting it to another format like HTML. Presumably, John Gruber wanted a format that could be read easily by the eye, allowing the user to be able to quickly understand which part of a text is a heading, which part is a list, which part is a paragraph etc .MD is designed not to be rendered for display, it is meant to be the display.
For example, a list written in .MD would look something like this:
* item 1
* item 2
* item 3
That actually looks like a list. In HTML we would do something similar and it would look like this:
- item 1
- item 2
- item 3
An asterisk looks like a bullet, so there is little cognisant drag here. Pretty readable.
However, things start to fall apart pretty fast. Can we really parse at speed, for example, nested bold and emphasis in .MD like this:
The quick *brown fox* **jumps** *over* the lazy **dog**
Is that or the following easier to read?
The quick brown fox jumps over the lazy dog
I’m going to say the second is easier to read. Way easier to read. So, that is just the start of the problems; from here on in it goes downhill pretty quick for use cases beyond simple READMEs.
MarkDown isn’t designed for creating HTML
So, let’s assume we can agree Markdown is readable in a very limited number of scenarios – and move on to rationalise (grasp at straws) other needs for the format. That is pretty much where we are today, with the big selling point being that Markdown is an easy way to create HTML. But let’s face it, even programmers don’t like reading raw Markdown and even in the most popular .MD repository of them all – github – the Markdown files are rendered in the browser as nicely formatted HTML. Great! A use case we can stand behind – use Markdown to create HTML.
However .MD is really a pretty bad way to create HTML. Firstly, you need something to convert the .MD into HTML. So if you use just a plain text editor to create .MD files and load it into the browser you will see just plain, boring Markdown. No nicely formatted documents for you. There are tools that programmers like, and so the rest of us are also expected to like them, for converting .MD to .html. After all, according to the technically gifted, converting a .MD file to HTML is “really really easy.”
One of the most common tools for doing this is Pandoc. Pandoc is a great software and extremely useful. However having to install and learn how to run Pandoc – a complex tool at best – to convert a text file to something readable – sounds a little like the long way home. And that’s not where the rot ends, far from it, the rot has only just set in and the worst is to come. If everyone was to use Pandoc to convert .MD to HTML we would have consistent conversion results. Unfortunately, that’s not what happens. Each to their own, and we have a lot of different tools with which to do these conversions, and hence we have different results created from the same source. Ugh. That is a file format nightmare right there.
And let’s say you want to add a little colour to your text. Perhaps a highlight? Forget about it. Markdown lacks the tools to enable you to do it. Pandoc might help, however – let’s add some colour highlights to a code block with this easy to remember command from the Pandoc manual:
pandoc code.text -s --highlight-style pygments -o example18a.html
So, first of all, do you know what a command is? Do you know what a terminal is? Happy using one? Oh..that’s actually not ok for you? No problems, there are plenty of online introductory courses on the command line. So before you write that funding document, “about” page on your website or scholarly research document – just whip through a quick course on the command line and you’ll be all set! (don’t forget to read the sections about installing software from the command line, you’ll need it to get Pandoc working).
Problems with conversion tools aside – Markdown struggles to find a nice way to represent HTML. It’s just a bad fit. Use Markdown for creating HTML and you will find all sorts of little formatting gotchas that will cause you frustration. It is why many markdown environments/conversion tools also support HTML tags.
All HTML is valid Markdown. If you’re stuck, not able to format your content as you would like (for example using tables), you can always use plain HTML instead of Markdown. http://support.ghost.org/markdown-guide/
So if you want to really write HTML with Markdown you have to, well, write HTML. Klaro.
Markdown was never intended for writing HTML. It wasn’t designed that way and for good reason – it doesn’t do it well.
Codified text
As mentioned above, by design, the original markdown has a very small subset of elements that can be converted to HTML. As John Gruber says in his philosophy:
Markdown is not a replacement for HTML, or even close to it…The idea for Markdown is to make it easy to read, write, and edit prose.
So, Markdown is not actually designed to be a good format for creating HTML. And it lives up to its design. It is for this reason that some Markdown formats ‘extend’ Markdown to include HTML code, and there are also other forks of Markdown that do some really weird stuff that I can hardly explain. For example, Ghost Markdown, the version of Markdown used for the (Open Source) Ghost blogging platform, tries to wrangle image formatting into Markdown. To place an image you have to write the following:
![]()
Intuitive, right? Nope.
The above is really a leap from ‘readable’ to ‘codified’. It is codified text and in order to be able to work with it, you need to know how to de-code the text… I’m sorry, but I just don’t get it. Markdown adds another level of codified complexity which I then need to de-code first (according to non-standardised, and not-standard rules written in some help file somewhere if I’m lucky), so that I can then sally forth and read the content? No thanks.
Say no to codified text.
Non-standardised formats suck
Efforts to take Markdown and extend it to meet a wider variety of formatting needs are actually where the big trouble starts. Markdown has gone off in a hundred-and-one different directions, each with its own syntax.
That means, if I want to write a Ghost blog (I love Ghost by the way, no disrespect to them) in Markdown (their required format) then it is not enough to learn Markdown. I must learn Ghost markdown …their particular reading of what a good markdown format is… So, that leads us to one of the really big problems. Markdown is not standardised.
Can any of us think of another non-standardised text format and where that leads us? Does MS Word and ‘world of pain’ ring any bells? Yes, Markdown is non-standardised and that is a very big no-no. It is, in fact, quite shocking that programmers, big on standards, do not quite see that by advocating Markdown they advocate dropping some central best practices. Can’t say anything more about that really.
But Markdown is structured!
I often hear the term “structured text” when referring to Markdown. For example, the opening lines from the CommonMark pre-amble.:
Markdown is a plain text format for writing structured documents
Sounds good doesn’t it? Sounds very techy and convincing. But what is structured text? Structured text means basically that we can see if something is a heading or something is a bulleted list, or something is a paragraph. Huh? But that describes just about any text document. Structured text is the basic requirement of any text you create – without it, you just have a flat plain-text document with no headings, no bullet lists etc. So… we might as well start every sentence about documents designed to be read as being ‘structured’. I think tomorrow I will go and buy a structured book. Or perhaps I will write a structured narrative on my text-structuring word processor. Excuse me word processor sales person, do you have structured text word processors? Ugh. Meaningless.
What is left?
Markdown is good for limited use cases. Use it for README files on github.
If you have a good dose of Markdown cool aid then don’t let me bring you down from your sugar high. Markdown away. However, if you have heard that there is this cool format available and it cures all your textual needs and it is just really really easy to use and really really quick… then think about the elixir you are being offered and re-read this document before slurping away…
Some comments on this article on Hacker News here:
https://news.ycombinator.com/item?id=8403783